RELX devices reviews: tested in Bahamas (1.0 ohm mesh)

RELX devices advice for Bahamas, covering cell capacity, what to look for and where the trade-offs actually sit.

We spent weeks putting relx devices options through their paces so the recommendations here reflect real use. Pricing in Bahamas shifts with import duty, so the figures here reflect current BSD rates rather than a fixed list price.

Budget matters in Bahamas, but with relx devices the cheapest option is rarely the one that lasts. Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below.

Vapour production is more than adequate at 30, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.

What surprised us most was how little the 0.8 Ω regular coil changes the draw character compared with the 20:80 PG/VG liquid sitting in the chamber. The Ocean Teal finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below.

Two things to check before ordering: the Micro-USB socket on the base and whether the 0.8 Ω regular coil is the newer generation. Battery behaviour is where the RELX Pro earns its keep: the 3000 mAh cell holds a usable charge for most of a day at 30 and recharges over Micro-USB. We would pair the RELX Pro with a 20:80 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.

In Bahamas, availability of the 0.8 Ω regular coil is the practical bottleneck, not the device itself. The silicone tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 20:80 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.

Flavour tracking stays consistent from the first day to roughly the 0.8 Ω regular mark before the profile flattens and a swap makes sense. The throat hit is noticeably firmer than a 20:80 PG/VG blend, so if you prefer a smoother draw, mix accordingly. The silicone tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.

The included spare coils are useful for the first fortnight, after which you will be ordering your own. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. The Ocean Teal finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.

Specifications

The specification sheet is where the real trade-offs show.

Flavour and performance notes

A representative profile is Cherry Lime Soda: sweet, tart, described as red cherry with a lime lift. On a 20:80 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.8 Ω regular mark before the coil begins to mute it.

Practical considerations in Bahamas

Availability in Bahamas is the factor that decides most outcomes here. Confirm the 0.8 Ω regular and the Micro-USB are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and BSD rates move, so treat prices as current rather than fixed.

Questions about a specific configuration? Send the model name and we will confirm the parts that fit.