Why RELX devices suits Bahamas users (0.8 ohm regular)
RELX devices advice for Bahamas, covering atomiser heads, what to look for and where the trade-offs actually sit.
Most Bahamas buyers start with a well-known brand name and then discover that fit and coil availability matter far more. We would pair the Innokin X with a 70:30 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
The Bahamas market for relx devices has grown steadily, and the choice on offer now is genuinely broad. The narrow bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.
We would pair the Innokin X with a 70:30 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 1.2 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Airflow control on the Innokin X is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 90, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
Comparing this against a 70:30 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 3.5 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 967 full puffs from a charge at 10 mg/ml, based on average session length in our testing.
What surprised us most was how little the 1.2 Ω mesh coil changes the draw character compared with the 70:30 PG/VG liquid sitting in the chamber. The Cobalt Blue finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Expect roughly 967 full puffs from a charge at 10 mg/ml, based on average session length in our testing.
Delivery across Bahamas is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window. The build quality on Innokin X is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. What surprised us most was how little the 1.2 Ω mesh coil changes the draw character compared with the 70:30 PG/VG liquid sitting in the chamber.
Specifications
Every unit in the Innokin X family shares the same core platform, so the differences come down to the numbers below.
| Reference model | Innokin X |
|---|---|
| Brand family | Elektron |
| Battery capacity | 1000 mAh |
| Power range | 90 W |
| Liquid capacity | 3.5 ml |
| Coil | 1.2 Ω mesh |
| Bottle size | 2.0 ml |
| Liquid ratio | 70:30 PG/VG |
| Nicotine strength | 10 mg/ml |
| Material | polycarbonate |
| Charge port | Type-C fast charge |
| Connector | 510 bottom pin |
| Airflow | dual bottom |
| Mouthpiece | narrow bore |
Flavour and performance notes
A representative profile is Kiwi Lime: tangy, green, described as tart kiwi balanced by lime. On a 70:30 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.2 Ω mesh mark before the coil begins to mute it.
Practical considerations in Bahamas
Availability in Bahamas is the factor that decides most outcomes here. Confirm the 1.2 Ω mesh and the Type-C fast charge are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and BSD rates move, so treat prices as current rather than fixed.
Take the time to get it right the first time; the difference shows up over months of use rather than days.
