The real story of RELX devices in Bahamas (v14)
RELX devices advice for Bahamas, covering head to head, what to look for and where the trade-offs actually sit.
Finding the right relx devices in Bahamas is easier than most catalogues make it sound. Charging over Type-C fast charge takes about 61 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
Finding the right relx devices in Bahamas is easier than most catalogues make it sound. Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below.
Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below. For disposable buyers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
We would pair the Vaporesso Tarot with a 30:70 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 0.6 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
The throat hit is noticeably firmer than a 30:70 PG/VG blend, so if you prefer a smoother draw, mix accordingly. Pricing in Bahamas shifts with import duty, so the figures here reflect current BSD rates rather than a fixed list price. Airflow control on the Vaporesso Tarot is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank.
The standard bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 30:70 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
The build quality on Vaporesso Tarot is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. What surprised us most was how little the 0.6 Ω mesh coil changes the draw character compared with the 30:70 PG/VG liquid sitting in the chamber. The Deep Purple finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Vapour production is more than adequate at 50, and pushing beyond that adds heat rather than anything worth carrying. Expect roughly 560 full puffs from a charge at 12 mg/ml, based on average session length in our testing.
Specifications
These are the figures that matter day to day, and the ones worth comparing across models.
| Reference model | Vaporesso Tarot |
|---|---|
| Brand family | RELX |
| Battery capacity | 3000 mAh |
| Power range | 50 W |
| Liquid capacity | 2.0 ml |
| Coil | 0.6 Ω mesh |
| Bottle size | 100 ml |
| Liquid ratio | 30:70 PG/VG |
| Nicotine strength | 12 mg/ml |
| Material | polycarbonate |
| Charge port | Type-C fast charge |
| Connector | 510 bottom pin |
| Airflow | mesh window |
| Mouthpiece | standard bore |
Flavour and performance notes
A representative profile is Blueberry Muffin: creamy, sweet, described as baked blueberry with a soft crumb. On a 30:70 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.
Practical considerations in Bahamas
Availability in Bahamas is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the Type-C fast charge are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and BSD rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.