RELX devices vs alternatives in Bahamas (v10)
RELX devices advice for Bahamas, covering mixing ratios, what to look for and where the trade-offs actually sit.
We spent weeks putting relx devices options through their paces so the recommendations here reflect real use. Comparing this against a 20:80 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
Most Bahamas buyers start with a well-known brand name and then discover that fit and coil availability matter far more. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
The 1.6 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1186 full puffs from a charge at 6 mg/ml, based on average session length in our testing. Delivery across Bahamas is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window.
Replacement coils are widely available, and the 0.6 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 0.6 Ω mesh coil changes the draw character compared with the 20:80 PG/VG liquid sitting in the chamber.
The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 0.6 Ω mesh mark before the profile flattens and a swap makes sense. In Bahamas, availability of the 0.6 Ω mesh coil is the practical bottleneck, not the device itself.
Comparing this against a 20:80 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. Vapour production is more than adequate at 90, and pushing beyond that adds heat rather than anything worth carrying. Expect roughly 1186 full puffs from a charge at 6 mg/ml, based on average session length in our testing.
The mesh tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Airflow control on the Innokin Sceptre is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. The 1.6 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Innokin Sceptre |
|---|---|
| Brand family | Kanger |
| Battery capacity | 800 mAh |
| Power range | 90 W |
| Liquid capacity | 1.6 ml |
| Coil | 0.6 Ω mesh |
| Bottle size | 50 ml |
| Liquid ratio | 20:80 PG/VG |
| Nicotine strength | 6 mg/ml |
| Material | stainless steel |
| Charge port | Micro-USB |
| Connector | magnetic contact |
| Airflow | fixed |
| Mouthpiece | mesh tip |
Flavour and performance notes
A representative profile is Cola Zero: sweet, fizzy, described as cola sweetness with a light fizz. On a 20:80 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.
Practical considerations in Bahamas
Availability in Bahamas is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the Micro-USB are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and BSD rates move, so treat prices as current rather than fixed.
Availability shifts often, so check the current listing before committing to a large order.
