Choosing RELX devices: tank lovers edition (3.0 ml)
RELX devices advice for Bahamas, covering flavour notes, what to look for and where the trade-offs actually sit.
The gap between a mid-range and a premium relx devices narrows once you know which components you actually use. What surprised us most was how little the 0.8 Ω mesh coil changes the draw character compared with the 60:40 PG/VG liquid sitting in the chamber.
Budget matters in Bahamas, but with relx devices the cheapest option is rarely the one that lasts. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
Delivery across Bahamas is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window. The build quality on Voopoo Drag is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal.
The Midnight Black finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the 510-X takes a small amount of care to keep clean, which we cover in the maintenance section below. For tank lovers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge.
The mesh tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 60:40 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 3.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
Airflow control on the Voopoo Drag is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 70, and pushing beyond that adds heat rather than anything worth carrying. Expect roughly 1411 full puffs from a charge at 20 mg/ml, based on average session length in our testing.
Charging over USB-C takes about 72 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the USB-C socket on the base and whether the 0.8 Ω mesh coil is the newer generation. For tank lovers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge.
Pricing in Bahamas shifts with import duty, so the figures here reflect current BSD rates rather than a fixed list price. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. Delivery across Bahamas is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Voopoo Drag |
|---|---|
| Brand family | SMOK |
| Battery capacity | 3000 mAh |
| Power range | 70 W |
| Liquid capacity | 3.0 ml |
| Coil | 0.8 Ω mesh |
| Bottle size | 1.6 ml |
| Liquid ratio | 60:40 PG/VG |
| Nicotine strength | 20 mg/ml |
| Material | stainless steel |
| Charge port | USB-C |
| Connector | 510-X |
| Airflow | fixed |
| Mouthpiece | mesh tip |
Flavour and performance notes
A representative profile is Blueberry Muffin: creamy, sweet, described as baked blueberry with a soft crumb. On a 60:40 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.8 Ω mesh mark before the coil begins to mute it.
Practical considerations in Bahamas
Availability in Bahamas is the factor that decides most outcomes here. Confirm the 0.8 Ω mesh and the USB-C are both in stock before committing, and check that the 510-X matches your existing device if you already own hardware. Duty and BSD rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.