RELX devices maintenance guide (v23)
RELX devices advice for Bahamas, covering servicing, what to look for and where the trade-offs actually sit.
We spent weeks putting relx devices options through their paces so the recommendations here reflect real use. Charging over USB-C takes about 71 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
Anyone who has compared relx devices options in Bahamas quickly learns that specification lists only tell part of the story. Comparing this against a 50:50 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
Two things to check before ordering: the USB-C socket on the base and whether the 0.8 Ω mesh coil is the newer generation. Battery behaviour is where the RELX Pro earns its keep: the 1000 mAh cell holds a usable charge for most of a day at 120 and recharges over USB-C. We would pair the RELX Pro with a 50:50 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 0.8 Ω mesh mark before the profile flattens and a swap makes sense. In Bahamas, availability of the 0.8 Ω mesh coil is the practical bottleneck, not the device itself.
What surprised us most was how little the 0.8 Ω mesh coil changes the draw character compared with the 50:50 PG/VG liquid sitting in the chamber. The Sunset Orange finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below.
Comparing this against a 50:50 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. For experienced users, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
The build quality on RELX Pro is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over USB-C takes about 71 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
Specifications
The specification sheet is where the real trade-offs show.
| Reference model | RELX Pro |
|---|---|
| Brand family | Innokin |
| Battery capacity | 1000 mAh |
| Power range | 120 W |
| Liquid capacity | 5.0 ml |
| Coil | 0.8 Ω mesh |
| Bottle size | 0.6 ml |
| Liquid ratio | 50:50 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | polycarbonate |
| Charge port | USB-C |
| Connector | 510 bottom pin |
| Airflow | fixed |
| Mouthpiece | mesh tip |
Flavour and performance notes
A representative profile is Frozen Berry Sorbet: sweet, icy, described as cold berry inhale with a soft exhale. On a 50:50 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.8 Ω mesh mark before the coil begins to mute it.
Practical considerations in Bahamas
Availability in Bahamas is the factor that decides most outcomes here. Confirm the 0.8 Ω mesh and the USB-C are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and BSD rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.
