Bahamas RELX devices comparison chart (Kanger K2)
RELX devices advice for Bahamas, covering troubleshooting, what to look for and where the trade-offs actually sit.
Anyone who has compared relx devices options in Bahamas quickly learns that specification lists only tell part of the story. Two things to check before ordering: the Micro-USB socket on the base and whether the 1.0 Ω mesh coil is the newer generation.
We spent weeks putting relx devices options through their paces so the recommendations here reflect real use. We would pair the Innokin X with a 20:80 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Pricing in Bahamas shifts with import duty, so the figures here reflect current BSD rates rather than a fixed list price. Airflow control on the Innokin X is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 150, and pushing beyond that adds heat rather than anything worth carrying.
Worth noting that the 510-X takes a small amount of care to keep clean, which we cover in the maintenance section below. For pod fans, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 1.0 Ω mesh mark before the profile flattens and a swap makes sense.
Replacement coils are widely available, and the 1.0 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 20:80 PG/VG liquid sitting in the chamber.
Specifications
These are the figures that matter day to day, and the ones worth comparing across models.
| Reference model | Innokin X |
|---|---|
| Brand family | Eleaf |
| Battery capacity | 4000 mAh |
| Power range | 150 W |
| Liquid capacity | 3.5 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 1.0 ml |
| Liquid ratio | 20:80 PG/VG |
| Nicotine strength | 20 mg/ml |
| Material | zinc alloy |
| Charge port | Micro-USB |
| Connector | 510-X |
| Airflow | dual bottom |
| Mouthpiece | narrow bore |
Flavour and performance notes
A representative profile is Mango Tango Ice: sweet, tropical, described as ripe mango warmed by a light menthol coolness. On a 20:80 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Bahamas
Availability in Bahamas is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510-X matches your existing device if you already own hardware. Duty and BSD rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.
