Bahamas RELX devices FAQ and answers (2025) (v13)
RELX devices advice for Bahamas, covering support, what to look for and where the trade-offs actually sit.
Budget matters in Bahamas, but with relx devices the cheapest option is rarely the one that lasts. Vapour production is more than adequate at 70, and pushing beyond that adds heat rather than anything worth carrying.
Local availability in Bahamas shapes the practical answer more than the marketing does. Expect roughly 639 full puffs from a charge at 12 mg/ml, based on average session length in our testing.
We would pair the Innokin Sceptre with a 55:45 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 0.8 Ω regular coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 0.8 Ω regular mark before the profile flattens and a swap makes sense.
Charging over Micro-USB takes about 77 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Micro-USB socket on the base and whether the 0.8 Ω regular coil is the newer generation. Battery behaviour is where the Innokin Sceptre earns its keep: the 1000 mAh cell holds a usable charge for most of a day at 70 and recharges over Micro-USB.
Comparing this against a 55:45 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 8.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. We would pair the Innokin Sceptre with a 55:45 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Expect roughly 639 full puffs from a charge at 12 mg/ml, based on average session length in our testing. Delivery across Bahamas is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Worth noting that the 510-X takes a small amount of care to keep clean, which we cover in the maintenance section below. For experienced users, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
Specifications
Every unit in the Innokin Sceptre family shares the same core platform, so the differences come down to the numbers below.
| Reference model | Innokin Sceptre |
|---|---|
| Brand family | Asvape |
| Battery capacity | 1000 mAh |
| Power range | 70 W |
| Liquid capacity | 8.0 ml |
| Coil | 0.8 Ω regular |
| Bottle size | 1.6 ml |
| Liquid ratio | 55:45 PG/VG |
| Nicotine strength | 12 mg/ml |
| Material | ABS + glass |
| Charge port | Micro-USB |
| Connector | 510-X |
| Airflow | ring control |
| Mouthpiece | standard bore |
Flavour and performance notes
A representative profile is Coconut Pineapple: creamy, tropical, described as smooth coconut layered over pineapple. On a 55:45 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.8 Ω regular mark before the coil begins to mute it.
Practical considerations in Bahamas
Availability in Bahamas is the factor that decides most outcomes here. Confirm the 0.8 Ω regular and the Micro-USB are both in stock before committing, and check that the 510-X matches your existing device if you already own hardware. Duty and BSD rates move, so treat prices as current rather than fixed.
Take the time to get it right the first time; the difference shows up over months of use rather than days.