Long-Term Test RELX devices explained (2026)
RELX devices advice for Bahamas, covering long-term test, what to look for and where the trade-offs actually sit.
Local availability in Bahamas shapes the practical answer more than the marketing does. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal.
Most Bahamas buyers start with a well-known brand name and then discover that fit and coil availability matter far more. Airflow control on the Smok Morph is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank.
Charging over USB-C takes about 61 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the USB-C socket on the base and whether the 0.2 Ω dual mesh coil is the newer generation. Battery behaviour is where the Smok Morph earns its keep: the 5000 mAh cell holds a usable charge for most of a day at 100 and recharges over USB-C.
Expect roughly 414 full puffs from a charge at 0 mg/ml, based on average session length in our testing. Delivery across Bahamas is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window. The build quality on Smok Morph is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry.
Pricing in Bahamas shifts with import duty, so the figures here reflect current BSD rates rather than a fixed list price. Airflow control on the Smok Morph is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 100, and pushing beyond that adds heat rather than anything worth carrying.
What surprised us most was how little the 0.2 Ω dual mesh coil changes the draw character compared with the 30:70 PG/VG liquid sitting in the chamber. The Cobalt Blue finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 0.2 Ω dual mesh mark before the profile flattens and a swap makes sense.
The standard bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 30:70 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Smok Morph |
|---|---|
| Brand family | AEKU |
| Battery capacity | 5000 mAh |
| Power range | 100 W |
| Liquid capacity | 2.0 ml |
| Coil | 0.2 Ω dual mesh |
| Bottle size | 300 ml |
| Liquid ratio | 30:70 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | stainless steel |
| Charge port | USB-C |
| Connector | magnetic contact |
| Airflow | dual bottom |
| Mouthpiece | standard bore |
Flavour and performance notes
A representative profile is Cinnamon Danish: sweet, spiced, described as cinnamon pastry with a light glaze. On a 30:70 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.2 Ω dual mesh mark before the coil begins to mute it.
Practical considerations in Bahamas
Availability in Bahamas is the factor that decides most outcomes here. Confirm the 0.2 Ω dual mesh and the USB-C are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and BSD rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.