Diy Mixers guide to RELX devices (budget) (Deng SQ200)
RELX devices advice for Bahamas, covering storage, what to look for and where the trade-offs actually sit.
Budget matters in Bahamas, but with relx devices the cheapest option is rarely the one that lasts. Flavour tracking stays consistent from the first day to roughly the 1.0 Ω mesh mark before the profile flattens and a swap makes sense.
We spent weeks putting relx devices options through their paces so the recommendations here reflect real use. In Bahamas, availability of the 1.0 Ω mesh coil is the practical bottleneck, not the device itself.
If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. The throat hit is noticeably firmer than a 65:35 PG/VG blend, so if you prefer a smoother draw, mix accordingly. Pricing in Bahamas shifts with import duty, so the figures here reflect current BSD rates rather than a fixed list price.
Replacement coils are widely available, and the 1.0 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. Airflow control on the Uwell G2 is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank.
Vapour production is more than adequate at 70, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
Two things to check before ordering: the Micro-USB socket on the base and whether the 1.0 Ω mesh coil is the newer generation. Battery behaviour is where the Uwell G2 earns its keep: the 2500 mAh cell holds a usable charge for most of a day at 70 and recharges over Micro-USB. We would pair the Uwell G2 with a 65:35 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Charging over Micro-USB takes about 69 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Comparing this against a 65:35 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. Battery behaviour is where the Uwell G2 earns its keep: the 2500 mAh cell holds a usable charge for most of a day at 70 and recharges over Micro-USB.
Worth noting that the 510-X takes a small amount of care to keep clean, which we cover in the maintenance section below. For diy mixers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Uwell G2 |
|---|---|
| Brand family | Vaptio |
| Battery capacity | 2500 mAh |
| Power range | 70 W |
| Liquid capacity | 6.5 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 1.0 ml |
| Liquid ratio | 65:35 PG/VG |
| Nicotine strength | 20 mg/ml |
| Material | stainless steel |
| Charge port | Micro-USB |
| Connector | 510-X |
| Airflow | ring control |
| Mouthpiece | standard bore |
Flavour and performance notes
A representative profile is Cinnamon Danish: sweet, spiced, described as cinnamon pastry with a light glaze. On a 65:35 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Bahamas
Availability in Bahamas is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510-X matches your existing device if you already own hardware. Duty and BSD rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.