RELX devices deals and bundles in Bahamas (v14)
RELX devices advice for Bahamas, covering setup, what to look for and where the trade-offs actually sit.
There is no single best relx devices for everyone in Bahamas, and anyone telling you otherwise is selling something. Comparing this against a 80:20 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
We spent weeks putting relx devices options through their paces so the recommendations here reflect real use. Expect roughly 693 full puffs from a charge at 0 mg/ml, based on average session length in our testing.
The Stealth Grey finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the 510 thread takes a small amount of care to keep clean, which we cover in the maintenance section below. For tank lovers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge.
We would pair the RELX Pro with a 80:20 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 0.8 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Comparing this against a 80:20 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 3.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 693 full puffs from a charge at 0 mg/ml, based on average session length in our testing.
Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 40, and pushing beyond that adds heat rather than anything worth carrying. Expect roughly 693 full puffs from a charge at 0 mg/ml, based on average session length in our testing.
Two things to check before ordering: the Type-C fast charge socket on the base and whether the 0.8 Ω mesh coil is the newer generation. Battery behaviour is where the RELX Pro earns its keep: the 5000 mAh cell holds a usable charge for most of a day at 40 and recharges over Type-C fast charge. We would pair the RELX Pro with a 80:20 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Charging over Type-C fast charge takes about 74 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. What surprised us most was how little the 0.8 Ω mesh coil changes the draw character compared with the 80:20 PG/VG liquid sitting in the chamber. Battery behaviour is where the RELX Pro earns its keep: the 5000 mAh cell holds a usable charge for most of a day at 40 and recharges over Type-C fast charge.
Specifications
Every unit in the RELX Pro family shares the same core platform, so the differences come down to the numbers below.
| Reference model | RELX Pro |
|---|---|
| Brand family | Voopoo |
| Battery capacity | 5000 mAh |
| Power range | 40 W |
| Liquid capacity | 3.0 ml |
| Coil | 0.8 Ω mesh |
| Bottle size | 1.6 ml |
| Liquid ratio | 80:20 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | stainless steel |
| Charge port | Type-C fast charge |
| Connector | 510 thread |
| Airflow | adjustable sliding |
| Mouthpiece | narrow bore |
Flavour and performance notes
A representative profile is Peach Blossom: sweet, delicate, described as soft white peach with a floral edge. On a 80:20 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.8 Ω mesh mark before the coil begins to mute it.
Practical considerations in Bahamas
Availability in Bahamas is the factor that decides most outcomes here. Confirm the 0.8 Ω mesh and the Type-C fast charge are both in stock before committing, and check that the 510 thread matches your existing device if you already own hardware. Duty and BSD rates move, so treat prices as current rather than fixed.
Take the time to get it right the first time; the difference shows up over months of use rather than days.