Bahamas RELX devices comparison chart (0.6 ohm mesh)
RELX devices advice for Bahamas, covering wholesale terms, what to look for and where the trade-offs actually sit.
There is no single best relx devices for everyone in Bahamas, and anyone telling you otherwise is selling something. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
We spent weeks putting relx devices options through their paces so the recommendations here reflect real use. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
What surprised us most was how little the 0.15 Ω dual mesh coil changes the draw character compared with the 65:35 PG/VG liquid sitting in the chamber. The Graphite finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below.
Two things to check before ordering: the Type-C fast charge socket on the base and whether the 0.15 Ω dual mesh coil is the newer generation. Battery behaviour is where the RELX Pro earns its keep: the 5000 mAh cell holds a usable charge for most of a day at 70 and recharges over Type-C fast charge. We would pair the RELX Pro with a 65:35 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 70, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
Flavour tracking stays consistent from the first day to roughly the 0.15 Ω dual mesh mark before the profile flattens and a swap makes sense. In Bahamas, availability of the 0.15 Ω dual mesh coil is the practical bottleneck, not the device itself. The mesh tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.
Expect roughly 1728 full puffs from a charge at 12 mg/ml, based on average session length in our testing. Replacement coils are widely available, and the 0.15 Ω dual mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Specifications
Here is what the engineering actually delivers, without the marketing language.
| Reference model | RELX Pro |
|---|---|
| Brand family | Innokin |
| Battery capacity | 5000 mAh |
| Power range | 70 W |
| Liquid capacity | 3.5 ml |
| Coil | 0.15 Ω dual mesh |
| Bottle size | 1.6 ml |
| Liquid ratio | 65:35 PG/VG |
| Nicotine strength | 12 mg/ml |
| Material | zinc alloy |
| Charge port | Type-C fast charge |
| Connector | 510 bottom pin |
| Airflow | adjustable sliding |
| Mouthpiece | mesh tip |
Flavour and performance notes
A representative profile is Melon Cucumber: fresh, light, described as clean cucumber under sweet melon. On a 65:35 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.15 Ω dual mesh mark before the coil begins to mute it.
Practical considerations in Bahamas
Availability in Bahamas is the factor that decides most outcomes here. Confirm the 0.15 Ω dual mesh and the Type-C fast charge are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and BSD rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.
